 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7078 MCH6612 N-Channel Silicon MOSFET MCH6612 Ultrahigh-Speed Switching Applications Preliminary Features * * * * Package Dimensions Low ON-resistance. unit : mm Ultrahigh-speed switching. 2173A 4V drive. Composite type with 2 MOSFETs contained in a single package, facilitating high-density mounting. 0.25 2.1 1.6 [MCH6612] 0.3 0.15 4 5 6 0.25 32 0.65 2.0 0.07 1 6 5 4 0.85 1 : Source1 2 : Gate1 3 : Drain2 4 : Source2 5 : Gate2 6 : Drain1 SANYO : MCPH6 Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm)1unit Conditions 1 2 3 Ratings 50 20 0.45 1.8 0.8 150 --55 to +150 Unit V V A A W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Conditions ID=1mA, VGS=0 VDS=50V, VGS=0 VGS=16V, VDS=0 VDS=10V, ID=100A VDS=10V, ID=100mA ID=100mA, VGS=10V ID=50mA, VGS=4V Ratings min 50 10 10 1 220 310 1.8 2.3 2.3 3.2 2.4 typ max Unit V A A V mS Marking : FL Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1501 TS IM TA-2467 No.7078-1/4 MCH6612 Continued from preceding page. Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=10V, VGS=10V, ID=200mA VDS=10V, VGS=10V, ID=200mA VDS=10V, VGS=10V, ID=200mA IS=200mA, VGS=0 Ratings min typ 22 12 4.6 12 12 260 110 1.86 0.28 0.45 0.83 1.2 max Unit pF pF pF ns ns ns ns nC nC nC V Switching Time Test Circuit VIN 10V 0V VIN ID=100mA RL=250 VOUT VDD=25V Electrical Connection D1 G2 S2 D PW=10s D.C.1% G S1 MCH6612 G1 D2 P.G 50 S 0.20 ID -- VDS V 6.0 0.40 ID -- VGS VDS=10V 3. 0.18 4.0 0V V 0.35 0.30 0.25 0.20 0.15 0.10 0.05 Drain Current, ID -- A 8.0 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 0 0.1 V 2.5V Drain Current, ID -- A 10. 0V 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Drain-to-Source Voltage, VDS -- V 6 IT00250 10 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V 25 IT00251 VGS=2.0V RDS(on) -- ID Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- Static Drain-to-Source On-State Resistance, RDS(on) -- 5 7 C VGS=10V Ta=75C 25C --25C 2 3 5 7 0.1 2 3 5 4 5 ID=50mA 3 100mA 3 2 2 1 0 0 1 2 3 4 5 6 7 8 9 10 1.0 0.01 Ta= 75 C --25 C Gate-to-Source Voltage, VGS -- V IT00252 Drain Current, ID -- A 7 1.0 IT00253 No.7078-2/4 MCH6612 10 RDS(on) -- ID VGS=4V 5.0 4.5 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- 7 Static Drain-to-Source On-State Resistance, RDS(on) -- 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 5 3 Ta=75C 25C 2 =4V GS A, V 10V 50m S= I D= A, VG m 100 I D= --25C 1.0 0.01 2 3 5 7 0.1 2 3 5 Drain Current, ID -- A 1.0 yfs -- ID 1.0 IT00254 7 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C 1.0 IT00255 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S 7 5 VDS=10V 25C 7 5 Forward Current, IF -- A 3 2 Ta= --25 3 2 C C 75 0.1 7 5 3 2 0.1 7 5 Ta=75 C 2 0.01 0.01 0.01 2 3 5 7 0.1 2 3 5 25C --25C 3 Drain Current, ID -- A 1000 7 5 1.0 IT00256 100 7 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IT00257 Diode Forward Voltage, VSD -- V SW Time -- ID td(off) Ciss, Coss, Crss -- VDS f=1MHz VDD=25V VGS=10V 7 5 Switching Time, SW Time -- ns 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 Ciss, Coss, Crss -- pF tf 3 2 Ciss 10 7 5 3 2 Coss td(on) tr Crss 1.0 5 7 0.1 2 3 0 5 10 15 20 25 30 35 40 45 50 Drain Current, ID -- A 10 9 IT00258 3 VGS -- Qg Drain-to-Source Voltage, VDS -- V IT00259 ASO Gate-to-Source Voltage, VGS -- V VDS=10V ID=200mA 2 1.0 IDP=1.8A <10s 1m s 8 Drain Current, ID -- A 7 6 5 4 3 2 1 0 0 0.5 1.0 1.5 2.0 2.5 IT00260 7 5 3 2 0.1 7 5 3 2 ID=0.45A 10 m s DC 10 0m op s er ati on Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board(900mm2!0.8mm)1unit 2 3 5 7 1.0 2 3 5 7 10 2 3 57 IT03642 0.01 0.1 Total Gate Charge, Qg -- nC Drain-to-Source Voltage, VDS -- V No.7078-3/4 MCH6612 1.0 PD -- Ta Allowable Power Dissipation, PD -- W 0.8 M 0.6 ou nt ed on ac era m ic 0.4 bo ard (9 00 m 0.2 m2 !0 .8m m )1 un 0 0 20 40 60 80 100 120 140 it 160 Ambient Temperature, Ta -- C IT03637 Note on usage : Since the MCH6612 is designed for high-speed switching applications, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2001. Specifications and information herein are subject to change without notice. PS No.7078-4/4 |
Price & Availability of MCH6612
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |